LED components, directly integrated into the Avalon’s design, produce bright illumination while consuming very little electricity. By reducing a building’s energy consumption, this wall sconce saves money and meets green building codes.
Hand built with an American made RLM warehouse shade, this quality industrial wall lighting is a lasting sconce option.Â
Made-to-order, learn more about the process here.
Read more about the Avalon LED Wall Sconce over on our blog!
CSA Listed
Wet Location
Please Note
Not Eligible for Return
Dimensions
12" Shade
W 12" x OAH 14" | Projection: 14"
16" Shade
W 16" x OAH 8 ½" | Projection: 17 ¾"
14" Shade
W 14" x OAH 15" | Projection: 15"
Backplate Dimensions: 6 ¼" Diameter
LED Product Details
LED Source
Cree LMH2 Module
Operating Temperature
-30ºC to 40ºC
Lumen Output
850 or 1250 Lumens
Input Voltage
Refer to Spec Sheet
Available CCT
2700K, 3000K, 3500K & 4000K (2 Step)
Wattage
11 to 16 Watts
CRI
Minimum 90
Lumen Maintenance
L90(6K) > 36,300 Hours
Efficacy
Up to 93 LPW
Dimming
Refer to Spec Sheet
Porcelain Enamel
Porcelain enamel, our signature finish, is celebrated for its protective properties and unique, high-gloss surface. Every porcelain shade is fired in a special oven. To relieve the pressure that builds up in these high temperatures, one or more vent holes are included in the shade's design. The hole(s) are later sealed with silicon to prevent any chance of moisture intrusion that could damage the shade.
All fixtures undergo a strict quality control evaluation to ensure they meet our high standards; however, some minor blemishes may occur due to our hands-on construction and manufacturing processes. These blemishes do not affect the functionality of the fixture.
Lead Times & Returns
Standard lead time is 7-14 business days. This is not applicable to commercial orders, Quick Ship lighting, or furniture. Quick Ship lighting has a standard lead time of 5-7 business days. Furniture requires a 4-6-week lead time. Copper and brass products have a longer lead time and may take up to 4 weeks to manufacture.
Returns are accepted for most products within 30 days of delivery. We do not accept returns on fixtures that have been installed or are damaged. There are no returns accepted on furniture items, natural metal products, or products assembled with GU24 sockets, integrated LED's or light bulbs. All fixtures undergo a strict quality control evaluation to ensure they meet our high standards; however, some minor blemishes may occur due to our hands-on construction and manufacturing processes. These blemishes do not affect the functionality of the fixture.
Finish Care & Maintenance
No metal fixture, no matter the finish, is guaranteed against corrosion, especially in salt air environments. If your fixture will be installed in a location near salt water, we recommend cleaning it monthly.
If your fixture is not installed in a location near salt water, we recommend periodic cleaning with a mild soap-and-water wash and gentle buffing to extend the life of our painted finishes.